Large Excavators 336 GC

Brand: Cat

Large Excavator

336 GC

The Cat® 336 GC offers class-leading comfort with less fuel and maintenance costs to ensure you get the most productivity at the lowest cost per hour.

Work up to 3300 m (10,830 ft) above sea level.
Standard high-ambient temperature capability is 52° C (125° F) with cold start capability at –18° C (0° F).
Automatic hydraulic oil warm up gets you to work faster in cold temperatures and helps prolong the life of components.
Two levels of filtration protect the engine from dirty diesel fuel.
Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
The center track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.

Work up to 3300 m (10,830 ft) above sea level.
Standard high-ambient temperature capability is 52° C (125° F) with cold start capability at –18° C (0° F).
Automatic hydraulic oil warm up gets you to work faster in cold temperatures and helps prolong the life of components.
Two levels of filtration protect the engine from dirty diesel fuel.
Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
The center track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.

The Comfort cab has a wide seat that adjusts for operators of all sizes.
Control the excavator comfortably with easy-to-reach controls all located in front of you.
Standard automatic climate control keeps you at the right temperature all shift long.
Advanced viscous mounts reduce cab vibration by up to 50 percent over previous excavator models.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.

Start the engine with a push button; use a Bluetooth key fob, smartphone app, or Operator ID passcode.
Program each joystick button, including power mode, response, and pattern, using Operator ID; the machine will remember what you set each time you go to work.
Navigate quickly on the standard high-resolution 203 mm (8 inch) touchscreen monitor or with the aid of the jog dial control.
Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds — all to prevent wear and tear on the attachment and excavator.
Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
The Cat Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy. The excavator’s onboard Bluetooth reader or Cat App on your phone will locate the device automatically.

Expect up to 20 percent less maintenance cost than the 336F due to extended service intervals (savings calculated over 12,000 machine hours).
Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
Using Cat genuine oil and filters and doing your typical S∙O∙S monitoring will double the current service interval to 1,000 hours, giving you greater uptime to do more work.
Oil and fuel filters are grouped and located on right-hand side of machine for easy maintenance.
The new air intake filter with pre-cleaner has double the dust holding capacity of the previous air intake filter.
The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous filter designs.
S·O·S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.

Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
The standard ROPS cab meets ISO 12117-2:2008 requirements.
A travel direction indicator helps operators know which way to activate the travel levers.
A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
A rearview camera is standard.

Other equipment

Large Excavator

336 GC

engine model

Cat C7.1

Large Wheel Loader

992

engine model

Cat® C32B

Medium Wheel Loader

950 GC

engine model

Cat C7.1

Medium Excavator

323 GC - TIER 3

engine model

Cat C7.1

Medium Excavator

330 GC - STAGE 3

engine model

Cat C7.1

Tractor

D4

engine model

Cat C4.4

+ 1 More Images

Excavator

Articulated Trucks

Backhoe Loader

Motorgraders

Multi Terrain Loader

Quarry Trucks

Scraper

Skid Steer Loader

Soil Compactor

Tractor

Wheel Loader

Medium Wheel Loader

Motorgraders

Soil Compactor

Tractor

REQUEST YOUR CREDIT

DIGITAL SOLUTIONS

COVERAGE PLANS

MAINTENANCE PLAN

Delivery IMCA

FIELD ENGINEERING

Technical service

Brand: Cat

336 GC

336 GC

992

950 GC

323 GC - TIER 3

330 GC - STAGE 3

D4

REQUEST QUOTE

CONTACT US

Services

quick link

Contact